dmesg - AMD PRO A6-8570 R5 8 COMPUTE CORES 2C
Linux version 5.12.14-300.fc34.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 11.1.1 20210531 (Red Hat 11.1.1-3), GNU ld version 2.35.1-41.fc34) #1 SMP Wed Jun 30 18:30:21 UTC 2021
[Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
random: get_random_u32 called from bsp_init_amd+0x183/0x210 with crng_init=0
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000dbaf1fff] usable
BIOS-e820: [mem 0x00000000dbaf2000-0x00000000dbc33fff] reserved
BIOS-e820: [mem 0x00000000dbc34000-0x00000000dc0bdfff] usable
BIOS-e820: [mem 0x00000000dc0be000-0x00000000dc1f2fff] ACPI NVS
BIOS-e820: [mem 0x00000000dc1f3000-0x00000000dcb74fff] reserved
BIOS-e820: [mem 0x00000000dcb75000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fe500000-0x00000000fe5fffff] reserved
BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000003feffffff] usable
BIOS-e820: [mem 0x00000003ff000000-0x000000041effffff] reserved
NX (Execute Disable) protection: active
e820: update [mem 0xd9fb3018-0xd9fc2e57] usable ==> usable
e820: update [mem 0xd9fb3018-0xd9fc2e57] usable ==> usable
e820: update [mem 0xd9fa4018-0xd9fb2057] usable ==> usable
e820: update [mem 0xd9fa4018-0xd9fb2057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x00000000d9fa4017] usable
reserve setup_data: [mem 0x00000000d9fa4018-0x00000000d9fb2057] usable
reserve setup_data: [mem 0x00000000d9fb2058-0x00000000d9fb3017] usable
reserve setup_data: [mem 0x00000000d9fb3018-0x00000000d9fc2e57] usable
reserve setup_data: [mem 0x00000000d9fc2e58-0x00000000dbaf1fff] usable
reserve setup_data: [mem 0x00000000dbaf2000-0x00000000dbc33fff] reserved
reserve setup_data: [mem 0x00000000dbc34000-0x00000000dc0bdfff] usable
reserve setup_data: [mem 0x00000000dc0be000-0x00000000dc1f2fff] ACPI NVS
reserve setup_data: [mem 0x00000000dc1f3000-0x00000000dcb74fff] reserved
reserve setup_data: [mem 0x00000000dcb75000-0x00000000deffffff] usable
reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
reserve setup_data: [mem 0x00000000fe500000-0x00000000fe5fffff] reserved
reserve setup_data: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
reserve setup_data: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
reserve setup_data: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x00000003feffffff] usable
reserve setup_data: [mem 0x00000003ff000000-0x000000041effffff] reserved
efi: EFI v2.70 by American Megatrends
efi: ACPI 2.0=0xdc174000 ACPI=0xdc174000 SMBIOS=0xdc9c3000 SMBIOS 3.0=0xdc9c2000 TPMFinalLog=0xdc0bf000 MEMATTR=0xda059698 ESRT=0xda8e0d18 MOKvar=0xda01b000 RNG=0xdc9cce98 TPMEventLog=0xd9fc3018
efi: seeding entropy pool
secureboot: Secure boot disabled
SMBIOS 3.2.0 present.
DMI: BIOSTAR Group A320MH/A320MH, BIOS 5.14 07/15/2020
tsc: Fast TSC calibration using PIT
tsc: Detected 3493.488 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x3ff000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x00000000da8e0d18 to 0x00000000da8e0d50.
e820: update [mem 0xda8e0000-0xda8e0fff] usable ==> reserved
e820: update [mem 0xda01b000-0xda01bfff] usable ==> reserved
Using GB pages for direct mapping
secureboot: Secure boot disabled
RAMDISK: [mem 0x5a223000-0x5ca79fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000DC174000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DC1740A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DC17B9C8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DC174200 0077C2 (v02 ALASKA A M I 01072009 INTL 20120913)
ACPI: FACS 0x00000000DC1DDD80 000040
ACPI: APIC 0x00000000DC17BAE0 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DC17BC40 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000DC17BC88 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: SSDT 0x00000000DC17BD28 000046 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
ACPI: MCFG 0x00000000DC17BD70 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: BHMB 0x00000000DC17BDB0 000474 (v01 ALASKA A M I 00000001 AMI 00000001)
ACPI: HPET 0x00000000DC17C228 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: UEFI 0x00000000DC17C260 000042 (v01 ALASKA A M I 00000002 01000013)
ACPI: SSDT 0x00000000DC17C2A8 00888F (v02 AMD AGESA 00000002 MSFT 04000000)
ACPI: VFCT 0x00000000DC184B38 00FE84 (v01 ALASKA A M I 00000001 AMD 31504F47)
ACPI: BGRT 0x00000000DC1949C0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: TPM2 0x00000000DC1949F8 000038 (v04 ALASKA A M I 00000001 AMI 00000000)
ACPI: SSDT 0x00000000DC194A30 0006B4 (v01 AMD AMD CPU 00000001 AMD 00000001)
ACPI: CRAT 0x00000000DC1950E8 000298 (v01 AMD AMD CRAT 00000001 AMD 00000001)
ACPI: CDIT 0x00000000DC195380 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
ACPI: SSDT 0x00000000DC1953B0 000BE8 (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DC195F98 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DC197CE8 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
ACPI: WSMT 0x00000000DC197DA8 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: Reserving FACP table memory at [mem 0xdc17b9c8-0xdc17badb]
ACPI: Reserving DSDT table memory at [mem 0xdc174200-0xdc17b9c1]
ACPI: Reserving FACS table memory at [mem 0xdc1ddd80-0xdc1dddbf]
ACPI: Reserving APIC table memory at [mem 0xdc17bae0-0xdc17bc3d]
ACPI: Reserving FPDT table memory at [mem 0xdc17bc40-0xdc17bc83]
ACPI: Reserving FIDT table memory at [mem 0xdc17bc88-0xdc17bd23]
ACPI: Reserving SSDT table memory at [mem 0xdc17bd28-0xdc17bd6d]
ACPI: Reserving MCFG table memory at [mem 0xdc17bd70-0xdc17bdab]
ACPI: Reserving BHMB table memory at [mem 0xdc17bdb0-0xdc17c223]
ACPI: Reserving HPET table memory at [mem 0xdc17c228-0xdc17c25f]
ACPI: Reserving UEFI table memory at [mem 0xdc17c260-0xdc17c2a1]
ACPI: Reserving SSDT table memory at [mem 0xdc17c2a8-0xdc184b36]
ACPI: Reserving VFCT table memory at [mem 0xdc184b38-0xdc1949bb]
ACPI: Reserving BGRT table memory at [mem 0xdc1949c0-0xdc1949f7]
ACPI: Reserving TPM2 table memory at [mem 0xdc1949f8-0xdc194a2f]
ACPI: Reserving SSDT table memory at [mem 0xdc194a30-0xdc1950e3]
ACPI: Reserving CRAT table memory at [mem 0xdc1950e8-0xdc19537f]
ACPI: Reserving CDIT table memory at [mem 0xdc195380-0xdc1953a8]
ACPI: Reserving SSDT table memory at [mem 0xdc1953b0-0xdc195f97]
ACPI: Reserving SSDT table memory at [mem 0xdc195f98-0xdc197ce1]
ACPI: Reserving SSDT table memory at [mem 0xdc197ce8-0xdc197da6]
ACPI: Reserving WSMT table memory at [mem 0xdc197da8-0xdc197dcf]
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000003feffffff]
NODE_DATA(0) allocated [mem 0x3fefd5000-0x3feffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x00000003feffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000dbaf1fff]
node 0: [mem 0x00000000dbc34000-0x00000000dc0bdfff]
node 0: [mem 0x00000000dcb75000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x00000003feffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x00000003feffffff]
On node 0 totalpages: 4051878
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA zone: 28769 pages in unavailable ranges
DMA32 zone: 14161 pages used for memmap
DMA32 zone: 906247 pages, LIFO batch:63
DMA32 zone: 7161 pages in unavailable ranges
Normal zone: 49088 pages used for memmap
Normal zone: 3141632 pages, LIFO batch:63
Normal zone: 4096 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
e820: update [mem 0xd8109000-0xd8349fff] usable ==> reserved
smpboot: Allowing 32 CPUs, 30 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xd8109000-0xd8349fff]
PM: hibernation: Registered nosave memory: [mem 0xd9fa4000-0xd9fa4fff]
PM: hibernation: Registered nosave memory: [mem 0xd9fb2000-0xd9fb2fff]
PM: hibernation: Registered nosave memory: [mem 0xd9fb3000-0xd9fb3fff]
PM: hibernation: Registered nosave memory: [mem 0xd9fc2000-0xd9fc2fff]
PM: hibernation: Registered nosave memory: [mem 0xda01b000-0xda01bfff]
PM: hibernation: Registered nosave memory: [mem 0xda8e0000-0xda8e0fff]
PM: hibernation: Registered nosave memory: [mem 0xdbaf2000-0xdbc33fff]
PM: hibernation: Registered nosave memory: [mem 0xdc0be000-0xdc1f2fff]
PM: hibernation: Registered nosave memory: [mem 0xdc1f3000-0xdcb74fff]
PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfe4fffff]
PM: hibernation: Registered nosave memory: [mem 0xfe500000-0xfe5fffff]
PM: hibernation: Registered nosave memory: [mem 0xfe600000-0xfe9fffff]
PM: hibernation: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
PM: hibernation: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: hibernation: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
PM: hibernation: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
PM: hibernation: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: hibernation: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
PM: hibernation: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc2000-0xfedc8fff]
PM: hibernation: Registered nosave memory: [mem 0xfedc9000-0xfedfffff]
PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
PM: hibernation: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists, mobility grouping on. Total pages: 3988540
Policy zone: Normal
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 15673040K/16207512K available (14345K kernel code, 3496K rwdata, 9848K rodata, 2548K init, 5428K bss, 534212K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 45991 entries in 180 pages
ftrace: allocated 180 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20210105
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325b494acba, max_idle_ns: 440795361931 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 6986.97 BogoMIPS (lpj=3493488)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
SELinux: Initializing.
LSM support for eBPF active
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 44K
smpboot: CPU0: AMD PRO A6-8570 R5, 8 COMPUTE CORES 2C+6G (family: 0x15, model: 0x65, stepping: 0x1)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 16
smpboot: Total of 2 processors activated (13973.95 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xdc0be000-0xdc1f2fff] (1265664 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 22:44:42, date: 2021-07-15
NET: Registered protocol family 16
DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1626389082.120:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
Kprobes globally optimized
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
cryptd: max_cpu_qlen set to 1000
alg: No test for 842 (842-generic)
alg: No test for 842 (842-scomp)
raid6: skip pq benchmark and using algorithm avx2x4
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 4 GPEs in block 00 to 1F
ACPI: PM: Power Resource [P0SD] (off)
ACPI: PM: Power Resource [P3SD] (off)
ACPI: PM: Power Resource [P0U2] (off)
ACPI: PM: Power Resource [P3U2] (off)
ACPI: PM: Power Resource [P0U3] (off)
ACPI: PM: Power Resource [P3U3] (off)
ACPI: PM: Power Resource [P0ST] (on)
ACPI: PM: Power Resource [P3ST] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 0x24: [mem 0xfe900000-0xfe93ffff]
pci 0000:00:01.0: reg 0x30: [mem 0xfe940000-0xfe95ffff pref]
pci 0000:00:01.0: enabling Extended Tags
pci 0000:00:01.0: BAR 0: assigned to efifb
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.0: PME# supported from D1 D2 D3hot
pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
pci 0000:00:01.1: reg 0x10: [mem 0xfe964000-0xfe967fff 64bit]
pci 0000:00:01.1: enabling Extended Tags
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
pci 0000:00:02.1: [1022:157c] type 01 class 0x060400
pci 0000:00:02.1: enabling Extended Tags
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
pci 0000:00:08.0: reg 0x10: [mem 0xf0800000-0xf081ffff 64bit pref]
pci 0000:00:08.0: reg 0x18: [mem 0xfe600000-0xfe6fffff]
pci 0000:00:08.0: reg 0x1c: [mem 0xfe96f000-0xfe96ffff]
pci 0000:00:08.0: reg 0x24: [mem 0xfe96a000-0xfe96bfff]
pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
pci 0000:00:09.2: [1022:157a] type 00 class 0x040300
pci 0000:00:09.2: reg 0x10: [mem 0xfe960000-0xfe963fff]
pci 0000:00:09.2: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
pci 0000:00:10.0: reg 0x10: [mem 0xfe968000-0xfe969fff 64bit]
pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe96d000-0xfe96d3ff]
pci 0000:00:11.0: PME# supported from D3hot
pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
pci 0000:00:12.0: reg 0x10: [mem 0xfe96c000-0xfe96c0ff]
pci 0000:00:12.0: supports D1 D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
pci 0000:01:00.0: [1022:43bc] type 00 class 0x0c0330
pci 0000:01:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.1: [1022:43b8] type 00 class 0x010601
pci 0000:01:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
pci 0000:01:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: PME# supported from D3hot D3cold
pci 0000:01:00.2: [1022:43b3] type 01 class 0x060400
pci 0000:01:00.2: enabling Extended Tags
pci 0000:01:00.2: PME# supported from D3hot D3cold
pci 0000:00:02.1: PCI bridge to [bus 01-06]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfe700000-0xfe8fffff]
pci 0000:02:04.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:04.0: enabling Extended Tags
pci 0000:02:04.0: PME# supported from D3hot D3cold
pci 0000:02:05.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:05.0: enabling Extended Tags
pci 0000:02:05.0: PME# supported from D3hot D3cold
pci 0000:02:06.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:06.0: enabling Extended Tags
pci 0000:02:06.0: PME# supported from D3hot D3cold
pci 0000:02:07.0: [1022:43b4] type 01 class 0x060400
pci 0000:02:07.0: enabling Extended Tags
pci 0000:02:07.0: PME# supported from D3hot D3cold
pci 0000:01:00.2: PCI bridge to [bus 02-06]
pci 0000:01:00.2: bridge window [io 0xe000-0xefff]
pci 0000:01:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:04.0: PCI bridge to [bus 03]
pci 0000:02:04.0: bridge window [io 0xe000-0xefff]
pci 0000:02:04.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:05.0: PCI bridge to [bus 04]
pci 0000:02:06.0: PCI bridge to [bus 05]
pci 0000:02:07.0: PCI bridge to [bus 06]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Translated
pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
pci 0000:00:01.0: vgaarb: bridge control possible
pci 0000:00:01.0: vgaarb: setting as boot device
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
Registered efivars operations
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xd8109000-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9fa4018-0xdbffffff]
e820: reserve RAM buffer [mem 0xd9fb3018-0xdbffffff]
e820: reserve RAM buffer [mem 0xda01b000-0xdbffffff]
e820: reserve RAM buffer [mem 0xda8e0000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdbaf2000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdc0be000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x3ff000000-0x3ffffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfeb80000-0xfebfffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [mem 0x3ff000000-0x41effffff window] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x0a00-0x0a1f] has been reserved
system 00:04: [io 0x0a20-0x0a2f] has been reserved
system 00:04: [io 0x0a30-0x0a3f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x040b] has been reserved
system 00:07: [io 0x04d6] has been reserved
system 00:07: [io 0x0c00-0x0c01] has been reserved
system 00:07: [io 0x0c14] has been reserved
system 00:07: [io 0x0c50-0x0c51] has been reserved
system 00:07: [io 0x0c52] has been reserved
system 00:07: [io 0x0c6c] has been reserved
system 00:07: [io 0x0c6f] has been reserved
system 00:07: [io 0x0cd0-0x0cd1] has been reserved
system 00:07: [io 0x0cd2-0x0cd3] has been reserved
system 00:07: [io 0x0cd4-0x0cd5] has been reserved
system 00:07: [io 0x0cd6-0x0cd7] has been reserved
system 00:07: [io 0x0cd8-0x0cdf] has been reserved
system 00:07: [io 0x0800-0x089f] has been reserved
system 00:07: [io 0x0b00-0x0b0f] has been reserved
system 00:07: [io 0x0b20-0x0b3f] has been reserved
system 00:07: [io 0x0900-0x090f] has been reserved
system 00:07: [io 0x0910-0x091f] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:07: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:02:04.0: PCI bridge to [bus 03]
pci 0000:02:04.0: bridge window [io 0xe000-0xefff]
pci 0000:02:04.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:05.0: PCI bridge to [bus 04]
pci 0000:02:06.0: PCI bridge to [bus 05]
pci 0000:02:07.0: PCI bridge to [bus 06]
pci 0000:01:00.2: PCI bridge to [bus 02-06]
pci 0000:01:00.2: bridge window [io 0xe000-0xefff]
pci 0000:01:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:02.1: PCI bridge to [bus 01-06]
pci 0000:00:02.1: bridge window [io 0xe000-0xefff]
pci 0000:00:02.1: bridge window [mem 0xfe700000-0xfe8fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe8fffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe7fffff]
pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
pci 0000:00:10.0: PME# does not work under D0, disabling it
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 41308K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000d3c88000-0x00000000d7c88000] (64MB)
amd_uncore: 4 amd_nb counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000007ff)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=22 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
NET: Registered protocol family 38
xor: automatically using best checksumming function avx
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
atomic64_test: passed for x86-64 platform with CX8 and with SSE
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
efifb: probing for efifb
efifb: showing boot graphics
efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fbcon: Deferring console take-over
fb0: EFI VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
ACPI: \_PR_.C000: Found 2 idle states
ACPI: \_PR_.C001: Found 2 idle states
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THRM] (31 C)
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m1024@0xfe96d000 port 0xfe96d100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfe96d000 port 0xfe96d180 irq 19
ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
scsi host8: ahci
scsi host9: ahci
ata3: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 34
ata4: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 34
ata5: DUMMY
ata6: DUMMY
ata7: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 34
ata8: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 34
ata9: DUMMY
ata10: DUMMY
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.0: EHCI Host Controller
ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.0: debug port 2
ehci-pci 0000:00:12.0: irq 18, io mem 0xfe96c000
ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.12.14-300.fc34.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.12.14-300.fc34.x86_64 xhci-hcd
usb usb2: SerialNumber: 0000:00:10.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
xhci_hcd 0000:00:10.0: xHCI Host Controller
xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.12.14-300.fc34.x86_64 xhci-hcd
usb usb3: SerialNumber: 0000:00:10.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000008000410
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.12.14-300.fc34.x86_64 xhci-hcd
usb usb4: SerialNumber: 0000:01:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 9 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.12.14-300.fc34.x86_64 xhci-hcd
usb usb5: SerialNumber: 0000:01:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
usbcore: registered new interface driver usbserial_generic
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: setting system clock to 2021-07-15T22:44:43 UTC (1626389083)
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
RPL Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
x86/pm: family 0x15 cpu detected, MSR saving is needed during suspending.
microcode: CPU0: patch_level=0x0600611a
microcode: CPU1: patch_level=0x0600611a
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
sched_clock: Marking stable (1229731409, 501623)->(1232380248, -2147216)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Fedora kernel signing key: 364aae414fc023c7bea80a65ee22c3090e7df774'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Btrfs loaded, crc32c=crc32c-generic, zoned=yes
Key type encrypted registered
integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)
integrity: Loaded X.509 cert 'Fedora Secure Boot CA: fde32599c2d61db1bf5807335d7b20e4cd963b42'
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 13:153:755
ata_link link6: hash matches
link6: hash matches
tty ttyS6: hash matches
RAS: Correctable Errors collector initialized.
usb 2-3: new full-speed USB device number 2 using xhci_hcd
usb 1-1: new high-speed USB device number 2 using ehci-pci
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 2-3: New USB device found, idVendor=058f, idProduct=9254, bcdDevice= 3.12
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3: Product: Generic USB Hub
usb 2-3: Manufacturer: ALCOR
hub 2-3:1.0: USB hub found
hub 2-3:1.0: 4 ports detected
ata4: SATA link down (SStatus 0 SControl 300)
tsc: Refined TSC clocksource calibration: 3493.443 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325b1f31d7d, max_idle_ns: 440795308042 ns
clocksource: Switched to clocksource tsc
usb 2-3.1: new full-speed USB device number 3 using xhci_hcd
usb 2-3.1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-3.1: Product: USB Receiver
usb 2-3.1: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3.1/2-3.1:1.0/0003:046D:C52B.0001/input/input3
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-3.1/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3.1/2-3.1:1.1/0003:046D:C52B.0002/input/input4
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3.1/2-3.1:1.1/0003:046D:C52B.0002/input/input5
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3.1/2-3.1:1.1/0003:046D:C52B.0002/input/input6
hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-3.1/input1
hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-3.1/input2
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: ATA-8: TOSHIBA MQ01ABD075, AX0A4M, max UDMA/100
ata7.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata7.00: configured for UDMA/100
scsi 6:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD0 4M PQ: 0 ANSI: 5
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 2-3.3: new low-speed USB device number 4 using xhci_hcd
sda: sda1 sda2 sda3
sd 6:0:0:0: [sda] Attached SCSI disk
usb 2-3.3: New USB device found, idVendor=10d5, idProduct=55a2, bcdDevice= 0.01
usb 2-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3.3: Product: 2Port KVMSwitcher
usb 2-3.3: Manufacturer: Device
usb 2-3.3: SerialNumber: 02\xc2\x92
input: Device 2Port KVMSwitcher as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3.3/2-3.3:1.0/0003:10D5:55A2.0004/input/input8
hid-generic 0003:10D5:55A2.0004: input,hidraw3: USB HID v1.00 Keyboard [Device 2Port KVMSwitcher] on usb-0000:00:10.0-3.3/input0
usbhid 2-3.3:1.1: couldn't find an input interrupt endpoint
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2548K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2036K
Freeing unused kernel image (rodata/data gap) memory: 392K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
Run /init as init process
with arguments:
/init
rhgb
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.12.14-300.fc34.x86_64
systemd[1]: systemd v248.3-1.fc34 running in system mode. (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured, using default hostname.
systemd[1]: Hostname set to .
systemd[1]: Queued start job for default target Initrd Default Target.
systemd[1]: Reached target Local File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on D-Bus System Message Bus Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Condition check resulted in Memstrack Anylazing Service being skipped.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Create System Users...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Finished Create list of static device nodes for the current kernel.
fuse: init (API version 7.33)
systemd[1]: Finished Create System Users.
audit: type=1130 audit(1626389085.044:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
audit: type=1130 audit(1626389085.053:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
i2c /dev entries driver
systemd[1]: Finished Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
audit: type=1130 audit(1626389085.057:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Finished Apply Kernel Variables.
audit: type=1130 audit(1626389085.065:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
audit: type=1130 audit(1626389085.084:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1626389085.094:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1626389085.096:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1626389085.111:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1626389085.167:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:01: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
libphy: r8169: probed
r8169 0000:03:00.0 eth0: RTL8168h/8111h, f4:b5:20:2f:f0:41, XID 541, IRQ 41
r8169 0000:03:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: Watchdog hardware is disabled
logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-3.1/input2
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel
AMD-Vi: AMD IOMMUv2 functionality not available on this system
r8169 0000:03:00.0 enp3s0: renamed from eth0
input: Logitech Wireless Device PID:1025 Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3.1/2-3.1:1.2/0003:046D:C52B.0003/0003:046D:1025.0005/input/input10
hid-generic 0003:046D:1025.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech Wireless Device PID:1025] on usb-0000:00:10.0-3.1/input2:1
input: Logitech Wireless Device PID:4004 Keyboard as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3.1/2-3.1:1.2/0003:046D:C52B.0003/0003:046D:4004.0006/input/input14
hid-generic 0003:046D:4004.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-0000:00:10.0-3.1/input2:2
input: Logitech M510 as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3.1/2-3.1:1.2/0003:046D:C52B.0003/0003:046D:1025.0005/input/input18
logitech-hidpp-device 0003:046D:1025.0005: input,hidraw1: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:10.0-3.1/input2:1
input: Logitech K360 as /devices/pci0000:00/0000:00:10.0/usb2/2-3/2-3.1/2-3.1:1.2/0003:046D:C52B.0003/0003:046D:4004.0006/input/input19
logitech-hidpp-device 0003:046D:4004.0006: input,hidraw2: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:00:10.0-3.1/input2:2
[drm] amdgpu kernel modesetting enabled.
Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from EFI VGA
amdgpu 0000:00:01.0: vgaarb: deactivate vga console
amdgpu 0000:00:01.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x1565:0x170B 0xE6).
amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[drm] register mmio base: 0xFE900000
[drm] register mmio size: 262144
[drm] add ip block number 0
[drm] add ip block number 1
[drm] add ip block number 2
[drm] add ip block number 3
[drm] add ip block number 4
[drm] add ip block number 5
[drm] add ip block number 6
[drm] add ip block number 7
[drm] add ip block number 8
[drm] add ip block number 9
amdgpu 0000:00:01.0: amdgpu: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 109-C95010-006
[drm] UVD is enabled in physical mode
[drm] VCE enabled in physical mode
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu 0000:00:01.0: amdgpu: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
amdgpu 0000:00:01.0: amdgpu: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 128bits UNKNOWN
[TTM] Zone kernel: Available graphics memory: 7908538 KiB
[TTM] Zone dma32: Available graphics memory: 2097152 KiB
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 3072M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F400300000).
amdgpu: hwmgr_sw_init smu backed is smu8_smu
[drm] Found UVD firmware Version: 1.91 Family ID: 11
[drm] UVD ENC is disabled
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
amdgpu: smu version 27.24.00
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB: 450000
[drm] DM_PPLIB: 553850
[drm] DM_PPLIB: 654550
[drm] DM_PPLIB: 720000
[drm] DM_PPLIB: 800000
[drm] DM_PPLIB: 900000
[drm] DM_PPLIB: 960000
[drm] DM_PPLIB: 1028580
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 102858
[drm] DM_PPLIB: memory_max_clock: 120000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Display clock
[drm] DM_PPLIB: 300000
[drm] DM_PPLIB: 400000
[drm] DM_PPLIB: 496560
[drm] DM_PPLIB: 626090
[drm] DM_PPLIB: 685720
[drm] DM_PPLIB: 757900
[drm] DM_PPLIB: 800000
[drm] DM_PPLIB: 847060
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 102858
[drm] DM_PPLIB: memory_max_clock: 120000
[drm] DM_PPLIB: level : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB: 667000
[drm] DM_PPLIB: 1200000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB: engine_max_clock: 102858
[drm] DM_PPLIB: memory_max_clock: 120000
[drm] DM_PPLIB: level : 8
[drm] Display Core initialized with v3.2.122!
BTRFS: device label fedora_localhost-live devid 1 transid 29172 /dev/sda3 scanned by systemd-udevd (358)
[drm] UVD initialized successfully.
[drm] VCE initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
amdgpu: Topology: Add dGPU node [0x9874:0x1002]
kfd kfd: added device 1002:9874
amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6
[drm] fb mappable at 0x3FF8E4000
[drm] vram apper at 0x3FF000000
[drm] size 3145728
[drm] fb depth is 24
[drm] pitch is 4096
fbcon: amdgpudrmfb (fb0) is primary device
fbcon: Deferring console take-over
amdgpu 0000:00:01.0: [drm] fb0: amdgpudrmfb frame buffer device
[drm] Initialized amdgpu 3.40.0 20150101 for 0000:00:01.0 on minor 0
BTRFS info (device sda3): disk space caching is enabled
BTRFS info (device sda3): has skinny extents
kauditd_printk_skb: 29 callbacks suppressed
audit: type=1131 audit(1626389087.609:40): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1626389087.619:41): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1626389087.619:42): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-cleanup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1626389087.624:43): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1626389087.626:44): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1626389087.626:45): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1626389087.626:46): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1626389087.628:47): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1626389087.628:48): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1626389087.629:49): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd-journald[244]: Received SIGTERM from PID 1 (systemd).
SELinux: policy capability network_peer_controls=1
SELinux: policy capability open_perms=1
SELinux: policy capability extended_socket_class=1
SELinux: policy capability always_check_network=0
SELinux: policy capability cgroup_seclabel=1
SELinux: policy capability nnp_nosuid_transition=1
SELinux: policy capability genfs_seclabel_symlinks=0
systemd[1]: Successfully loaded SELinux policy in 329.940ms.
systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 35.586ms.
systemd[1]: systemd v248.3-1.fc34 running in system mode. (+PAM +AUDIT +SELINUX -APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd-sysv-generator[534]: SysV service '/etc/rc.d/init.d/livesys' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
systemd-sysv-generator[534]: SysV service '/etc/rc.d/init.d/livesys-late' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
zram: Added device: zram0
kauditd_printk_skb: 15 callbacks suppressed
audit: type=1334 audit(1626389094.765:65): prog-id=17 op=LOAD
audit: type=1334 audit(1626389094.765:66): prog-id=18 op=LOAD
audit: type=1334 audit(1626389094.765:67): prog-id=19 op=LOAD
audit: type=1131 audit(1626389094.766:68): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: initrd-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Switch Root.
audit: type=1130 audit(1626389094.767:69): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1131 audit(1626389094.767:70): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=initrd-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice Virtual Machine and Container Slice.
audit: type=1334 audit(1626389094.769:71): prog-id=17 op=UNLOAD
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Login Prompts.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Local Verity Integrity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on User Database Manager Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Preprocess NFS configuration convertion...
systemd[1]: plymouth-switch-root.service: Deactivated successfully.
systemd[1]: Stopped Plymouth switch root service.
audit: type=1131 audit(1626389094.829:72): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-switch-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-fsck-root.service: Deactivated successfully.
systemd[1]: Stopped File System Check on Root Device.
audit: type=1131 audit(1626389094.830:73): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Stopped Journal Service.
audit: type=1130 audit(1626389094.830:74): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: sysroot.mount: Deactivated successfully.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@drm.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module drm.
systemd[1]: modprobe@fuse.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module fuse.
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounting Kernel Configuration File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Mounted Kernel Configuration File System.
systemd[1]: Finished Load Kernel Modules.
BTRFS info (device sda3): use zstd compression, level 1
BTRFS info (device sda3): disk space caching is enabled
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Special handling of early boot iSCSI sessions being skipped.
systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
systemd-journald[555]: Received client request to flush runtime journal.
acpi_cpufreq: overriding BIOS provided _PSD data
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
input: PC Speaker as /devices/platform/pcspkr/input/input20
zram0: detected capacity change from 0 to 16777216
kauditd_printk_skb: 34 callbacks suppressed
audit: type=1130 audit(1626389101.287:107): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-zram-setup@zram0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Adding 8388604k swap on /dev/zram0. Priority:100 extents:1 across:8388604k SSFS
kvm: Nested Virtualization enabled
SVM: kvm: Nested Paging enabled
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:00:01.1: Force to non-snoop mode
snd_hda_intel 0000:00:09.2: enabling device (0004 -> 0006)
audit: type=1130 audit(1626389102.209:108): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC891: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x17/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Line=0x16
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input21
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input22
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:09.2/sound/card1/input23
input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:09.2/sound/card1/input24
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input25
snd_hda_intel 0000:00:01.1: bound 0000:00:01.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input26
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input27
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/sound/card0/input28
audit: type=1130 audit(1626389103.514:111): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
audit: type=1130 audit(1626389103.852:112): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1626389103.895:113): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1626389104.032:114): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1130 audit(1626389104.412:115): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
audit: type=1334 audit(1626389104.430:116): prog-id=26 op=LOAD
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver (mii_bus:phy_addr=r8169-300:00, irq=MAC)
r8169 0000:03:00.0 enp3s0: Link is Down
r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
rfkill: input handler disabled
logitech-hidpp-device 0003:046D:4004.0006: HID++ 2.0 device connected.
rfkill: input handler enabled
rfkill: input handler disabled
logitech-hidpp-device 0003:046D:1025.0005: HID++ 1.0 device connected.
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
usb 2-3: USB disconnect, device number 2
usb 2-3.1: USB disconnect, device number 3
usb 2-3.3: USB disconnect, device number 4
usb 2-3: new low-speed USB device number 5 using xhci_hcd
usb 2-3: device descriptor read/64, error -71
usb 2-3: device descriptor read/64, error -71
usb 2-3: new low-speed USB device number 6 using xhci_hcd
usb 2-3: device descriptor read/64, error -71
usb 2-3: device descriptor read/64, error -71
usb usb2-port3: attempt power cycle
usb 2-3: new low-speed USB device number 7 using xhci_hcd
usb 2-3: Device not responding to setup address.
usb 2-3: Device not responding to setup address.
usb 2-3: device not accepting address 7, error -71
usb 2-3: new low-speed USB device number 8 using xhci_hcd
usb 2-3: Device not responding to setup address.
usb 2-3: Device not responding to setup address.
usb 2-3: device not accepting address 8, error -71
usb usb2-port3: unable to enumerate USB device
usb 2-3: new low-speed USB device number 9 using xhci_hcd
usb 2-3: device descriptor read/64, error -71
usb 2-3: device descriptor read/64, error -71
usb 2-3: new low-speed USB device number 10 using xhci_hcd
usb 2-3: device descriptor read/64, error -71
usb 2-3: device descriptor read/64, error -71
usb usb2-port3: attempt power cycle
usb 2-3: new low-speed USB device number 11 using xhci_hcd
usb 2-3: Device not responding to setup address.
usb 2-3: Device not responding to setup address.
usb 2-3: device not accepting address 11, error -71
usb 2-3: new low-speed USB device number 12 using xhci_hcd
usb 2-3: Device not responding to setup address.
usb 2-3: Device not responding to setup address.
usb 2-3: device not accepting address 12, error -71
usb usb2-port3: unable to enumerate USB device
r8169 0000:03:00.0 enp3s0: Link is Down
PM: suspend entry (deep)
Filesystems sync: 1.209 seconds
Freezing user space processes ... (elapsed 0.004 seconds) done.
OOM killer disabled.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
printk: Suspending console(s) (use no_console_suspend to debug)
serial 00:06: disabled
sd 6:0:0:0: [sda] Synchronizing SCSI cache
sd 6:0:0:0: [sda] Stopping disk
PM: suspend devices took 0.498 seconds
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
LVT offset 0 assigned for vector 0x400
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x11
microcode: CPU1: patch_level=0x0600611a
ACPI: \_PR_.C001: Found 2 idle states
CPU1 is up
ACPI: Waking up from system sleep state S3
[drm] PCIE GART of 1024M enabled (table at 0x000000F400300000).
amdgpu: smu version 27.24.00
usb usb4: root hub lost power or was reset
usb usb5: root hub lost power or was reset
serial 00:06: activated
sd 6:0:0:0: [sda] Starting disk
[drm] UVD initialized successfully.
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
[drm] VCE initialized successfully.
PM: resume devices took 0.326 seconds
acpi LNXPOWER:07: Turning OFF
OOM killer enabled.
Restarting tasks ... done.
video LNXVIDEO:00: Restoring backlight state
PM: suspend exit
Generic FE-GE Realtek PHY r8169-300:00: attached PHY driver (mii_bus:phy_addr=r8169-300:00, irq=MAC)
usb 4-5: new full-speed USB device number 2 using xhci_hcd
r8169 0000:03:00.0 enp3s0: Link is Down
usb 4-5: New USB device found, idVendor=058f, idProduct=9254, bcdDevice= 3.12
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5: Product: Generic USB Hub
usb 4-5: Manufacturer: ALCOR
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
usb 4-5.2: new full-speed USB device number 3 using xhci_hcd
usb 4-5.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10
usb 4-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-5.2: Product: USB Receiver
usb 4-5.2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0009: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:01:00.0-5.2/input2
input: Logitech M510 as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb4/4-5/4-5.2/4-5.2:1.2/0003:046D:C52B.0009/0003:046D:1025.000A/input/input30
logitech-hidpp-device 0003:046D:1025.000A: input,hidraw1: USB HID v1.11 Mouse [Logitech M510] on usb-0000:01:00.0-5.2/input2:1
input: Logitech K360 as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb4/4-5/4-5.2/4-5.2:1.2/0003:046D:C52B.0009/0003:046D:4004.000B/input/input31
logitech-hidpp-device 0003:046D:4004.000B: input,hidraw2: USB HID v1.11 Keyboard [Logitech K360] on usb-0000:01:00.0-5.2/input2:2
usb 4-5.3: new low-speed USB device number 4 using xhci_hcd
ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7.00: configured for UDMA/100
usb 4-5.3: New USB device found, idVendor=10d5, idProduct=55a2, bcdDevice= 0.01
usb 4-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-5.3: Product: 2Port KVMSwitcher
usb 4-5.3: Manufacturer: Device
usb 4-5.3: SerialNumber: 0\x12\xc2\x92
input: Device 2Port KVMSwitcher as /devices/pci0000:00/0000:00:02.1/0000:01:00.0/usb4/4-5/4-5.3/4-5.3:1.0/0003:10D5:55A2.000C/input/input32
hid-generic 0003:10D5:55A2.000C: input,hidraw3: USB HID v1.00 Keyboard [Device 2Port KVMSwitcher] on usb-0000:01:00.0-5.3/input0
usbhid 4-5.3:1.1: couldn't find an input interrupt endpoint
r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
logitech-hidpp-device 0003:046D:4004.000B: HID++ 2.0 device connected.
logitech-hidpp-device 0003:046D:1025.000A: HID++ 1.0 device connected.